Back in April 2015, Rocky Mountain Institute and partners including Global X and HOMER Energy published a study, The Economics of Load Defection, that examined how grid-connected solar-plus-battery systems will compete with traditional electric service.
The findings showed that declining costs for such systems, combined with retail price hikes for grid electricity, would make grid-connected solar-plus-battery systems economically optimal for customers in many parts of the country by 2030. Furthermore, solar-plus-battery systems can offer other important benefits to customers, such as backup power for critical loads in the event of a grid outage and cost savings via peak-demand shaving and time-of-use shifting. However, at the time, RMI’s study did not detail the exact nature of energy storage costs.
Figuring out how to compare apples to apples
To break down the installed costs of PV-plus-storage systems today, RMI and NREL first analyzed data across a variety of existing studies from sources including Lazard and GTM, in addition to our own experience in the RMI Innovation Center.
One challenge to analyzing component costs and system prices for PV-plus-storage installations is choosing an appropriate metric. Unlike standalone PV, energy storage lacks a standard set of widely accepted benchmarking metrics, such as dollars-per-watt of installed capacity or levelized cost of energy. Energy storage costs can vary both by the total energy capacity of the system — expressed in $/kilowatt-hour (kWh) — and the rate at which it charges or discharges — expressed in $/kilowatt (kW).
Some consumers may prefer to optimize their system for longer-duration discharge, while others may have high peak demand and want to optimize their storage solution for power (kW) rather than energy capacity (kWh). Given the diversity of household preferences and load profiles, using a single metric can artificially distort reported costs, making it difficult to compare across varying systems. Therefore, we used the total installed price as our primary metric, rather than using a metric normalized to system size.
To analyze component costs and system prices for PV-plus-storage installed in the first quarter of 2016, we adapted NREL’s component- and system-level bottom-up cost-modeling approach for standalone PV. Our methodology includes accounting for all component and project-development costs incurred when installing residential systems, and it models the cash purchase price for such systems, excluding the federal Investment Tax Credit (ITC).
Getting down to cases
Applying these methods, we looked at two primary cases: one that we refer to as the small-battery (3 kW/6 kWh) case, and another that we refer to as the large-battery (5 kW/20 kWh) case. For each, we test sensitivities around two sets of alternatives: DC- or AC-coupling configurations, and retrofit or new installations. The distinction between DC and AC coupling determines whether the battery stores power directly from the PV panels or first converts it to AC power, which allows AC charging from both the PV panels and the grid.
The small-battery case is designed for a typical customer’s self-consumption of electricity, including peak-demand shaving and time-of-use shifting, whereas the large-battery case is designed to support greater backup energy requirements for improved resiliency to outages.
Here’s what we found: The benchmarked price of the small-battery case — which uses a 5.6-kW solar PV array and a 3-kW/6-kWh lithium-ion battery — is about twice as high as the price of a standalone grid-connected 5.6-kW solar PV system (see Figure 1). The DC-coupled system price ($27,703) is $1,865 lower than the AC-coupled system price ($29,568) for a new PV-plus-storage installation.
The price premium for AC-coupled systems is mainly due to the hardware and labor costs associated with the additional grid-tied inverter required for AC coupling. However, installed price is not the only consideration when comparing AC- and DC-coupled systems: AC-coupled systems are more efficient in applications where PV energy is generally used at the time of generation, and DC-coupled systems tend to be more efficient in applications where PV energy is stored and used later.
FIGURE 1: Modeled Total Installed Cost and Price Components for Residential PV-Plus-Storage Systems, Small-Battery Case (2016 U.S. Dollars)
We also compared the small-battery case shown in the chart above with the large-battery case that’s designed to increase resiliency by providing longer periods of backup power during grid outages. The larger system uses a 5.6-kW solar PV array with a higher-capacity 5-kW/20-kWh lithium-ion battery (see Figure 2).
The DC-coupled price of this resiliency system is $45,237, which is 63 percent more than the DC-coupled price of the small-battery system. With AC coupling, the price of the resiliency system is $47,171, which is 60 percent more than the price of the small-battery system. But in exchange for the increased cost of the larger system, a household could potentially cover critical loads for roughly four times longer than with the small system, other things being equal.
FIGURE 2: Modeled Total Installed Cost and Price Components for Residential PV-Plus-Storage Systems, Small-Battery Case vs. Large-Battery Case (2016 U.S. dollars)
All economic viability is local: Extreme variety in non-hardware costs
The component-level breakdown shows that hardware costs constitute just half the total price of the small-battery system and roughly 60 percent of the large-battery resiliency system. And the rest of the costs depend on where the system is installed: locality-specific costs and processes like permitting, interconnection, net metering, and fire codes can vary widely, affecting not only project costs but project timelines as well.
Some of the biggest variables affecting the financial viability of grid-connected solar-plus-storage projects are the local utility rates, incentives and ancillary benefit valuations. Often, the utility rate structure (e.g., whether it uses peak-demand pricing, time-of-use rates, and the like) is the primary factor determining the financial viability of adding storage to a PV system.
A path forward
While PV-plus-storage system costs continue to decline, they still remain relatively high for many residential uses on account of soft costs related to permitting and regulatory barriers. However, as utilities and permitting jurisdictions gain familiarity with residential storage systems, we anticipate that the residential storage market will grow at an increasing rate in the U.S.
The work presented in this paper is an important step to help technology manufacturers, installers, and other stakeholders identify cost-reduction opportunities while also informing decision-makers about regulatory, policy and market characteristics that impede solar-plus-storage deployment. Technology costs are changing rapidly, and this cost benchmarking lays the foundation for ongoing tracking of improvements in real-world systems.
Kristen Ardani is a solar program lead for solar soft costs and tech to market at the National Renewable Energy Laboratory (NREL); David Labrador is a writer and editor at RMI; Chris McClurg is a Senior Associate with RMI’s Building’s Practice. This piece was originally published at RMI's Outlet and was reprinted with permission.
See how you can save with #Solar Energy http://ow.ly/Xnkg302gEfq